Ola Fremming's homepage

My methods and tricks in modeling.

Over the years I have learned a few tricks which I like to share with all of you out there.  

How-to's:

• Make stab-adjusters
• Hyde-mount
• Changing ball-bearings 
• Make room for that long pipe.
• Sheeting of foam-wings using a vacuum-bag.
• Make fiberglass wing-tube sockets.
• Mould you own canopy in carbon.
• Make a stiff pushrod from balsa.
• Make hole for cables inside foam-wings.
• Convert to a dual-plug head.
• Pull-pull to MK BB-coupler.
• 15/11-09 : Making honeycomb panels
• 15/11-09 : Servo-wells in foam-core wings
• 22/11-09 : Reduce weight of foam-wings
• 02/10-10 : Use a PC PSU to power your charger
• 17/12-11 : Mill out Depon on F3P models
• 27/12-11 : Foam plug-in wings
• 96/99-14 : Calibration of iCharger (received from Sverre Johannessen)